72 Cav. PET Preform Injection Moulding Machines

72 Cav. PET Preform Injection Moulding Machines

Click here for details.

72 Cav. PET Preform Injection Moulding Machines with Rebot+Cooling

Product ID: DMK-PET72B

Send Inquiry
Demark 72 cavities pet preform injection moulding machine@(pet preform injection moulding systems@pet preform injection moulding plant@) uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.

Demark pet preform injection moulding machines are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.
Demark pet injection systems offer:
1. Faster cycles(10s)
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up

Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;

Reflex Platens
Reflex platens distribute clamp force evenly across the platen face.
Reflex platens:
1. Allow for 10-30% lower clamp tonnage
2. Decrease mold wear
3. Improve part quality

Injection Units
demark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.

Polaris Controls
PC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetLink
4. Control of molding system and auxiliaries from a single interface

Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.
TYPE DMK-PET72A DMK-PET72B
INJECTION UNIT Screw L/D Ratio (L/D) 25 25
Injection Pressure (Kgf/CM²) 875 875
Machine Size(LxWxH) (mm) 11080X4400X2500 11080X4400X2500
Theory Shot Volume(Max) (㎝) 2905 4069
Shot Weight(PS) (g) 3486 5426
Shot Weight(PS) (ozs) 123 191
CLAMPING UNIT Clamping Force (T) 500 500
Clamping Stroke (mm) 680 680
Max/Min Thickness of Mould (mm) 300~820 300~820
Space Between Tie Bars (WxH) (mm) 820X820 820X820
Ejector Stroke (mm) 200 200
Ejector Force (T) 21 21
NO.of Ejector Pins (pcs) 13 13
Max Pressure of System Kg/CM² 140 140
INJECTION MOULD Cavity(Max) (PCS) 72 72
Neck of Bottle(Max) (mm) 42 42
Length of Preform(Max) (mm) 220 220
Weight of Preform(Max) (g) 30 45
Form of Mould Pneumatic pin-valve gate hot-runner Pneumatic pin-valve gate hot-runner
POWER UNIT Pump Motor Power (KW) 130 130
Robot Power (KW) 14 14
No.of Heater Zones(0~400°C) 73+13 73+13
Heater Input Capacity(kw) 58 62
Mould Heater Capacity(kw) 70 70
Auto Manipulator Manipulator(cav) 216 216
Cooling Form(cav) 216 216
OTHER REQUEST Electric Power supply(3-phase AC)(v) 380 380
Electric Power supply(3-phase AC)(kw) 235 245
Chilling Water(degree) 5-15 5-15
Chilling Water(Mpa) 0.45 0.45
Chilling Water(L/min) 400 400
Cooling Water(degree) 30~55 30-55
Cooling Water(Mpa) 0.25 0.25
Cooling Water(L/min) 200 200
Compressed Air(Mpa) 0.7-0.9 0.7-0.9
Compressed Air(L/min) 1200 1200
Compressed Air (Max) Pcs/h 23000 23000
Certificate
  • CE
  • TUV
  • ISO9001

Main Products

Pet Stretch Blow Molding Machine, Pet Preform Mold/Mould, Bottle Blowing Machines, Pet Preform Injection Molding Machine/System, Cap Mold, Cap Mould or Closure Mold, Closure Mould, Lid Mold, Lid Mould

Contact Detail